Energy Solutions
Whether you already drive an EV or are planning the switch, home charging offers everyday convenience and flexibility. This guide covers the essentials — from choosing the right charger to preparing your home for safe installation.
Best for overnight charging, lower daily mileage and regular city driving
A portable charger that plugs into a standard household outlet
Power rating is less than 3.7 kW
Service Panel may require an upgrade
Note: Light EV (2/3-wheel) chargers typically work with existing capacity, while passenger 4-wheel EV chargers may require a service upgrade.
Best for faster charging, multiple users, longer driving distances
A charger that is wall-mounted and requires installation by a licensed electrical engineer or an authorized contractor
Power rating ranges from 7.4-11.5 kW
Service Panel upgrade may be necessary
Note: Level 2 chargers have higher power rating and typically require a service upgrade.
Expand each step to learn what to prepare, what to do, and what to expect next.
Have a licensed electrical practitioner (RME, REE, PEE) check your home’s available electrical capacity, recommend the right charger setup, and identify a safe installation location.
Complete any electrical work based on the assessment of your licensed electrical practitioner.
If additional service capacity from Meralco is required, apply at a Meralco Business Center or through mer.ph/ServiceApplication — opens in a new tab.
Meralco will evaluate your application and advise you on the required load-side work.
Once your home is ready, have a licensed electrical practitioner install and test your charger before use.
Need Installation Support? You may engage with DOE-accredited EVCS Providers, or a Private Electrical Contractor Certified by Meralco through Certified by Meralco — opens in a new tab
| Requirement | Level 1 Charger | Level 2 Charger |
|---|---|---|
| Main Circuit Breaker Rating & Household Load Capacity | Refer to a licensed electrical practitioner: a Registered Master Electrician (RME), Registered Electrical Engineer (REE), or Professional Electrical Engineer (PEE) | |
| Voltage Requirement | 230V, single-phase | 230V, single-phase 400V, three-phase |
| Breaker | Typically rated at 15–20A. The breaker supplying the outlet must be dedicated solely to the home charger. | Typically 40–60A |
| Wiring | For 3.7kW, at least 2mm² Copper (~14 AWG) cable wire size | For 7kW, at least 3.5mm² Copper (~12 AWG) cable wire size For 11kW, at least 3.5mm² Copper (~12 AWG) cable wire size for three-phase and at least 8.00mm² Copper (~8 AWG) cable wire size for single phase |
Note: While the above installation requirements are typical, it is still best to consult a licensed electrical practitioner.
Need a private electrical contractor certified by Meralco?
Find a Contractor — opens in a new tab
Enjoy lower generation charges all night and every Sunday with Meralco's Peak/Off-Peak program — ideal for overnight home charging.
Learn more about the Peak / Off-Peak Program
Bundle your home charger with a solar PV system and worry less by earning bill credits from exporting excess solar power
Learn more about the Net-Metering Program